Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Configuration to get a single ended output from MAX2606

Status
Not open for further replies.
D

dumindu89

Member level 1
Joined
Feb 26, 2012
Messages
38
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,585
Hi all!
I need to get a single ended output from the MAX2606 VCO IC.
Can anyone one confirm that the configuration shown in following figure is correct or not?
If not please let me know the correct configuration.

**broken link removed**

MAX2606 datasheet: **broken link removed**
 

R1 and R2 need to be connected to Vcc. Also, normally you would number the chip pins 1,2,3 etc, not P$1, P$2 etc.

Keith
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top