Nov 15, 2011 #1 G goldperson2005 Junior Member level 2 Joined Nov 8, 2011 Messages 21 Helped 1 Reputation 2 Reaction score 1 Trophy points 1,283 Activity points 1,420 I use this version but I cant get right output . In print preview I cant see bottom layer . Last edited: Nov 17, 2011
Nov 15, 2011 #2 loosemoose Full Member level 5 Joined Dec 9, 2008 Messages 319 Helped 128 Reputation 258 Reaction score 115 Trophy points 1,323 Location Vancouver, BC Activity points 2,662 Re: Altium Designer 10.7 Have you set it up properly in the "Page Setup"? Go >>File >> Print Setup , then select "Advanced". In this panel you need to setup the appropriate layers to print. Right click in the white area to get add layers and printout. K
Re: Altium Designer 10.7 Have you set it up properly in the "Page Setup"? Go >>File >> Print Setup , then select "Advanced". In this panel you need to setup the appropriate layers to print. Right click in the white area to get add layers and printout. K
Nov 16, 2011 #3 P PCBcomponentlibraries Advanced Member level 4 Joined Oct 14, 2011 Messages 102 Helped 43 Reputation 86 Reaction score 42 Trophy points 1,308 Location Cheshire, UK Activity points 1,809 Re: Altium Designer 10.7 Output job files are really good for this kinda thing - **broken link removed** You can save them as a template also so that you don't have to configure it every time. Hope this helps, Chris.
Re: Altium Designer 10.7 Output job files are really good for this kinda thing - **broken link removed** You can save them as a template also so that you don't have to configure it every time. Hope this helps, Chris.