Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Can 16F877 use 3.3V in ICD2?

Status
Not open for further replies.
I

Interface

Newbie level 1
Joined
Apr 30, 2006
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,287
In ICD2, 16F877(A) use 5V power and CY7C64613 use 3.3V power. Why 16F877(A) not use 3.3V also? If I make it connect to 3.3V, which components and parameters should be changed?
 

The answer is no.

You will need the LF version of 877(A) to get it works at 3.3V. However, this version only works at frequencies up to 10 MHz, but the requiring frequency in ICD2 is 20 MHz.

Cheers,
 

Thank you very much. I just learn PIC mcu,and want to make a ICD2.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top