Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Calibre to Assura rule conversio help

Status
Not open for further replies.

sree_lakshmi

Junior Member level 2
Joined
Jun 16, 2007
Messages
24
Helped
4
Reputation
8
Reaction score
2
Trophy points
1,283
Location
hyderabad
Activity points
1,410
Hi,

I have a rule in calibre that need to be converted into assura drc.
Please help me.

VIA1.R.2_FSG { @ When M1 or M2 width > 1.4um, more than 1 VIA1 is required.
@ if the metal has < 4 vias, vias spacing should be <= 0.71um,
@ or if the metal has >=4 vias, at least 4 vias spacing should be <= 1um
How can I detect via array in assura?

Regards,
Sree
 

erikl

Super Moderator
Staff member
Joined
Sep 9, 2008
Messages
8,112
Helped
2,685
Reputation
5,350
Reaction score
2,284
Trophy points
1,393
Location
Germany
Activity points
44,153
You can find vias' spacing < any_limit in assura by

drc( VIA1.R.2_FSG sep < any_limit "VIA1.R.2_FSG spacing < any_limit" )

examples, if measures in units of [µm]:

drc( VIA1.R.2_FSG sep < 1.0 "VIA1.R.2_FSG spacing < 1.0" )
drc( VIA1.R.2_FSG sep < 0.71 "VIA1.R.2_FSG spacing < 0.71" )
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top