Gigan
Member level 1
Re: Cadence Virtuoso Analog Artist: Multiple result in one t
I do a dc analysis (operating point) of a circuit with number of transistors.
Using the "Tools/Table" option of "Result browser " i can place desired parameter, for example "vce", of one transistor (Q1) in to the table. Then vce for next transistor in to next table, an so on...
my question is:
How I can automatically place in to one table "vce" values (or other parameter) in the same time for all available transistors Q1, ..., Qn of the complete circuit?
Added after 3 hours 8 minutes:
Added after 1 minutes:
I have already myself soved this problem.
Thank you.
Added after 3 hours 14 minutes:
solved
I do a dc analysis (operating point) of a circuit with number of transistors.
Using the "Tools/Table" option of "Result browser " i can place desired parameter, for example "vce", of one transistor (Q1) in to the table. Then vce for next transistor in to next table, an so on...
my question is:
How I can automatically place in to one table "vce" values (or other parameter) in the same time for all available transistors Q1, ..., Qn of the complete circuit?
Added after 3 hours 8 minutes:
Added after 1 minutes:
Gigan said:
I have already myself soved this problem.
Thank you.
Added after 3 hours 14 minutes:
solved