Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Build a RF SPECTRUM ANALYZER?

Status
Not open for further replies.

leemarrow

Full Member level 3
Joined
May 3, 2001
Messages
174
Helped
11
Reputation
22
Reaction score
9
Trophy points
1,298
Activity points
985
how to build pc based spectrum analyzers

Hi to all,
i need to build a simple RF Spectrum Analyzer using an Oscilloscope or a TV.
Anyone have a good project?
 

spectrum analyzer using an oscilloscope

Yes, check out: **broken link removed**
 

rf spectrum analyzer

thank you.
I have read that you have build it, it is easy to build?
The material are easy to find?
 

rf old project

Well, assembling is not difficult but tunning and adjusting can be. It depends. Here in Slovenia where the project originates the supply of critical components was organized. The project is now 9 years old.
 
spectrum s53mv

Well, if the project is old 9 years it is easy to find components.
There are not new critical component.
Now i read articles and I estimate from I make myself
 

how to make a spectrumanalyzer

Problems may be in obtaining HP MMICs and HEMPTs. A 10.7MHz crystals for IF filter must be without parasitic resonances such as used in commercial crystal filters. Oscillator crystals are not suitable. Other semiconductors are standard ones and easily obtainable. PCBs were sold by VHF Communications and brass boxes (there are a plenty of them) you can still get from Slovenia.

Just to encourage you, here are PCBs for RF part in case you want to make it yourselfs:
it is TOP-view
 

slovenya rf

Hi, many thanks :D
In effect for HP MMICs and HEMPTs the problems can rise. I can buy from rs or other international seller
 

spectrum analyzer s53mv

Hi,
i have found another good project pc based:

**broken link removed**
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top