Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Benq Model ET-0026-B Type G2222HDH Monitor is overscanning

Status
Not open for further replies.

ljcox

Full Member level 5
Joined
Feb 1, 2006
Messages
250
Helped
25
Reputation
50
Reaction score
23
Trophy points
1,298
Location
Melbourne Australia
Activity points
3,088
I was given a Benq Model ET-0026-B Type G2222HDH Monitor by a friend but he did not have a User Manual for it.

I searched the Benq site for a User Manual with no luck.

As you can see in the attachment (I copied the left hand lower portion of the screen - the sample is about half the screen in height) the left hand edge of the screen is missing.

Also note that the text is small.

I experimented with the buttons on the Monitor and found that I could change the Horizontal position, but not the scanning width.

I attempted to change the text size in Windows 7/Control Panel/Display & in Microsoft Outlook without success.

Does anyone know how to fix these issues?

Does any one have a User Manual for the Benq mentioned above or one for a similar Monitor?

Any assistance will be appreciated.
 

Attachments

  • Screen sample.jpg
    Screen sample.jpg
    46 KB · Views: 32

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top