Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

AT89C5131 ISP UART Programming

Status
Not open for further replies.

IS

Newbie level 3
Joined
Sep 18, 2009
Messages
3
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
1,298
Hi, I bought this AT89C5131 Board Kit, tried to program with USB ISP and succeed, but when trying to program with UART [RS232] using MAX232, and selecting RS232 in FLIP program, it won't let me program and show the message "Timeout error", what could be wrong? is it have to do with Bootloader or something?
 

IS

Newbie level 3
Joined
Sep 18, 2009
Messages
3
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
1,298
Anyone?
 

GetDeviceInfo

Advanced Member level 4
Joined
Mar 30, 2009
Messages
109
Helped
4
Reputation
8
Reaction score
4
Trophy points
1,298
Activity points
1,904
the bootloader is specifically USB based. You could load the RS232 based bootloader found on the Atmel site, but why?
 

IS

Newbie level 3
Joined
Sep 18, 2009
Messages
3
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
1,298
thanks for replay, just wounderd if I could do RS232 & USB Flashing together,
I think it always good to have other ways to flash your program, RS232 is much easier because the PC don't need any drivers, but USB must have, and requires New hardware detection. on the other hand RS232 sadly will soon disapper completly.
 
Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top