Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

assessment of simulation softwares(cst, hfss, wipl-d, etc.)

Status
Not open for further replies.

edf

Full Member level 2
Joined
Feb 21, 2002
Messages
120
Helped
21
Reputation
42
Reaction score
18
Trophy points
1,298
Activity points
700
wipl-d

http://ace1.antennasvce.org/Dissemination/view/download?id_file=51


INTRODUCTION
The objective of this preliminary report is to assess millimeter antenna design software.
This not an exhaustive review but it correspond to the major available partners software.
In millimeter and sub-millimeter wave range, the size of antennas is very small compared to
antenna in lower frequencies range. But those structures are in general large compared to the
wave length as : dielectric lenses, reflectors,…In this case, accurate 3D EM simulation must be
used taking into account all antenna parameters. Many softwares exist and assessed in W-1-1, but
this report concern only commercial software. Most of them are European and are described in the
following review.
 

Re: assessment of simulation softwares(cst, hfss, wipl-d, et

Hi,

I am interested in this but could not download. can you post it here or give another link?

Thanks
 

Re: assessment of simulation softwares(cst, hfss, wipl-d, et

file attached
 

Thanks; interesting at IETR :;x

But it was forgot the problem of duo-core pentium and one-core pentium :(
 

Re: assessment of simulation softwares(cst, hfss, wipl-d, et

Thank edf.

This is an interesting report with a lot of different structures and comparisons. Very valuable information.
 

Re: assessment of simulation softwares(cst, hfss, wipl-d, et

A very useful document!

Thank you for pointing out to it.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top