Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Asix AX88796 or SMsC LAN91C111?

Status
Not open for further replies.
E

eknuds

Newbie level 2
Joined
Dec 9, 2004
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
21
asix ax88796

I have a project I'm working on and I'm trying to decide between these two chips.
I was wondering how easy it is to work with these chips from a hardware/software perspective and how good the developer/designer support is from these two companies.
 

lan91c111

AX88796 has lower power consumption and is NE2000 compatible, also cheaper. they have knowledgable driver support enigneer too. most embedded network product in Taiwan use this chip, they just do little modification to their old 10 Mbit NE2000 ethernet design to support the 10/100Mbit speed.
 

lan91c111 cheaper

I also have a project with AX88796.
I strong recommend to use this chip.
And they have a good presentation file to tell you
how to implement packet driver and how to handle
the ethernet ring buffer.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top