Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Antenna radiation pattern

Status
Not open for further replies.

masifiqbal

Newbie level 4
Joined
Mar 20, 2014
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
33
I have designed simple transmitter at 2.4 GHz (VCO + Amplifier +antenna). I just want to know that my antenna also receiving DC voltage. on output of amplifier, I did not use dc blocking capacitor. Does this voltage effect antenna efficiency or it is required to radiate antenna ? kindly explain,,,,,
 

It is not really possible for an antenna to receive a DC voltage, except in some extraordinary circumstances in nonuniform E fields. If this is happening, something else is causing the DC offset.
 
Amplifier is directly attached with Antenna, and antenna taking this voltage from the output of amplifier as I did not use dc blocking capacitor. so in this case radiation will effect or not?
 

Is this a transmit antenna? If so, the DC bias on the antenna will not affect your radiation pattern unless there is something nonlinear with your antenna. DC does not radiate so the antenna itself is acting like a DC blocking capacitor. If the antenna is a loop type antenna, the DC bias will generate a strong current, cause heating, etc.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top