Agilant AppCAd design assistant updates

[Phil woz ere]

Hi All.

Just posted Agilant AppCAD RF design assistant V2.5 on Fileman.
This is Freeware that is shipped to people that have purchased Agilant RF test equipment.
A must for any RF PCB designer.
It can do all the RF track calculations and also has a good Active and Passive circuit calculator as well plus many other features.

Download ACE files, Install and enjoy.

Phil :wink:

 

[g579]

appcad

You can download a newer version (Ver 3.0) of AppCad from
http://www.hp.woodshot.com

 

[u_f_o]

appcad version 3.0.2

Please note: There are two "undocumented features" (as Microsoft refers to bugs) in this prototype version 3.0.0 of AppCAD:

1. All "DB" formatted S2P files will incorrectly return the error message "S2P file contains S12 = 0". The workaround for this issue is to reformat the S- parameter file into magnitude-angle "MA".

2. S-parameter files with frequency units of "Hz" will be incorrectly displayed by a factor of 10. (All other frequency units are correct.) A simple workaround is to adjust the analysis frequency. For example, to sweep a desired frequency range of 1000 to 3000 MHz, set the frequency range to 100 to 300 MHz.

They apologize for this inconvenience. An updated version of AppCAD that corrects these two issues will be available very soon.

Let us wait updated version!
best regards.

u_f_o

 

[toonafishy]

appcad 3.0

I sure wish they would add an option to print and to save files. Then it would become a very useful program!

 

[u_f_o]

appcad freeware

hi!
AppCAD updated to version 3.0.1 !
Version 3.0.1 is a minor upgrade to version 3.0.0 and adds these new features:
Adds log frequency scale option for Rectangular Plots
Adds calculation and display of Isolation parameter
Adds all S-parameters to the Tabular List display
Correctly displays S2P file data in Hz
Allows S2P files in DB format
Updates the S-parameter library with new products
Allows S2P files with |S12| = 0 and/or |S21| = 0
Expanded information in the Help

You can freely download this version from
http://www.hp.woodshot.com/
size ~13.8M
best regards.
u_f_o

 

[goldensol]

how to use appcad 3.0.2

You make a mistake.
It updated to Version 3.0.2
File size: 14.5 MB (14,491,753 bytes)