Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Adding parts from a PCB to an Eagle library.

Status
Not open for further replies.
S

snelson99

Newbie level 1
Joined
Feb 28, 2009
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,287
eagle library parts

The company that I work for has several PCBs for which there are no supporting Eagle library files. The exported part list for the schematic and PCB list the main company library as the source, but many of the parts are not there.

Is there any way to extract the parts and symbols from the schematic and PCB and add them to the library?
 

pcb parts library lbr

Yes. Use exp-project-lbr.ulp

Good luck, ep20k
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top