gadly
Newbie level 6
- Joined
- May 19, 2009
- Messages
- 14
- Helped
- 2
- Reputation
- 4
- Reaction score
- 2
- Trophy points
- 1,283
- Location
- Brisbane, Australia
- Activity points
- 1,393
I'm designing the AD9914 into a new product but because it's a fresh release from Analog Devices the lack of information/support is frustrating. I need:
I've already looked at the Analog Devices page https://www.analog.com/en/rfif-components/direct-digital-synthesis-dds/ad9914/products/product.html and there's not much there apart from the datasheet.
Any help will be gratefully received.
- A suitable 3.5GHz external clock source/design (I'm running it at full speed)
- Schematics/PCB layout for their evaluation board AD9914/PCBZ
- Any other/recommended PCB layout info for this device
- Any other application information available
I've already looked at the Analog Devices page https://www.analog.com/en/rfif-components/direct-digital-synthesis-dds/ad9914/products/product.html and there's not much there apart from the datasheet.
Any help will be gratefully received.