Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

about usb what do bit stuffing do in usb 2.0 design

Status
Not open for further replies.

kil

Member level 5
Joined
Feb 15, 2006
Messages
89
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,286
Location
banglore
Activity points
2,032
hi

i strarted a mini project on UTMI block in USB 2.0 .so iam going through intel pds . my dout is what actually this BIT STUFFING helps in error detection and why NZRI ENCODING and DECODING is done .

plz help me how to approch this mini project

i am going through intel's UTMI pdf's . but i am not getting an overall idea about why bit stuffing and other things are actually doing


:cry:
krushi
 

Thomson

Full Member level 3
Joined
Oct 15, 2004
Messages
181
Helped
4
Reputation
8
Reaction score
1
Trophy points
1,298
Activity points
2,400
Please see the USB2.0 Spec, it will help you!


Thomson
 

AlexWan

Full Member level 5
Joined
Dec 26, 2003
Messages
304
Helped
8
Reputation
16
Reaction score
2
Trophy points
1,298
Activity points
2,692
Because the signals of USB aren't according to the pointed clock. There are "phase shift".

If you don't insert the stuff bit, how do you know that you have got the right bit after continuous "1"?
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top