tarun_taurus said:
Vin is the reference means vout will be calculated with vin as ref. , vout/vin...
this simulation gives TOTAL noise w.r.t. Vin..
flicker noise is contained if you have evoked or changed the correct BSIM parameters of flicker noise.otherwise not.
OK, thank you very much!
And another question, in the .lis netlist, there are some parameters of mos transistors, show as follows:
element 143:m26 143:m44
rd 0. 0.
rs 0. 0.
id 1.628e-26 0.
rx 40.1108m 228.9693u
fn 0. 0.
total 1.628e-26 0.
what does rd, rs id, rx, fn and total mean?