Hi longstar - The Metal slot procedure is for Metal Stress Relief this must be made for releasing stress in every wide metal line. The wide metal line are defined in PDK that your are using.Also slot directions in metal should be parallel in current flow not perpendicular and make sure that it's in staggered style slot to maximize procedure.
In terms of slot Layers I really don't know why you have these in your layer menu.
What technology are you using?
thank you, fixrouter4400
I only want to get a simple and quick method to slot.It's too slow if you use the quick key(shift + c)to slot on a 100um width metal.
thank you, fixrouter4400
I only want to get a simple and quick method to slot.It's too slow if you use the quick key(shift + c)to slot on a 100um width metal.