shaq
Full Member level 5
Dear all,
I want to design a 30us-delay circuit.
The spec. is shown below.
1. You can only use R,C,PMOS and NMOS in IC. External components are not allowed.
2. Current consumption < 1nA when VCC=4V.
3. Input is a very low clock signal with 500Hz of frequency.
Output is a delayed clock signal of 30us.
Anyone helps?
I want to design a 30us-delay circuit.
The spec. is shown below.
1. You can only use R,C,PMOS and NMOS in IC. External components are not allowed.
2. Current consumption < 1nA when VCC=4V.
3. Input is a very low clock signal with 500Hz of frequency.
Output is a delayed clock signal of 30us.
Anyone helps?