Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

24 v DC to 5 v DC converting

Status
Not open for further replies.

Chetan Singh

Newbie level 1
Joined
Feb 5, 2014
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
7
Hi guys,
I need to reduce 24 volts, 1 amp DC to 5 volts, 1 amp DC.
for operating beetel 220BX ADSL2 + Modem
Can anyone help? Details would be much appreciated.

mod: email removed
 

You can use LM2596 switching regulator. The cost of a board from ebay is about $1 so you may as well buy a ready solution

LM2596.JPG

Note that you should avoid linear regulator solutions like LM7805 or LM317, they are inefficient and generate too much heat when the in/out level difference high.
 

switching based step down converter is the way too go for efficiency and thermal issue. 1A*19V, too much power disspation in the chip
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top