Mithun_K_Das
Advanced Member level 3
- Joined
- Apr 24, 2010
- Messages
- 899
- Helped
- 24
- Reputation
- 48
- Reaction score
- 26
- Trophy points
- 1,318
- Location
- Dhaka, Bangladesh, Bangladesh
- Activity points
- 8,254
How can I measure the average points of the peak if these signals and one avg of max&min value of sine wave. Note that I'm new with dsPIC ics but have been working with PIC and atmel ICs for a long time. Yes, I can do it in my older method but those are time consuming for this product. That is why I'm asking for suggestion from experienced friends who did similar work with dsPIC.
Using dsPIC30F2010. Compiler: mikroC pro for dsPIC v7.1.0
There is a small dc voltage in each signal which can not be eliminated from these signals with circuits.
Kindly do not ask for the circuit diagram. The circuit is a ready made device which is not my importance, I'm just trying to do the same working code of that product in my way. I measured the signals in ADC pins and mentioned in the image. There are 4 different signals to measure.
Any suggestion or small example will be greatly helpful to me.
Using dsPIC30F2010. Compiler: mikroC pro for dsPIC v7.1.0
There is a small dc voltage in each signal which can not be eliminated from these signals with circuits.
Kindly do not ask for the circuit diagram. The circuit is a ready made device which is not my importance, I'm just trying to do the same working code of that product in my way. I measured the signals in ADC pins and mentioned in the image. There are 4 different signals to measure.
Any suggestion or small example will be greatly helpful to me.