Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

ADC trouble with dsPIC33FJ32MC204 - (MPlab/c30/RTDM)

Status
Not open for further replies.
zsolt1

zsolt1

Full Member level 6
Joined
Aug 11, 2012
Messages
367
Helped
50
Reputation
100
Reaction score
49
Trophy points
1,308
Location
Cluj-Napoca, Romania
Activity points
3,880
hi,
I am facing a problem with the ADC module of dsPIC33FJ32MC205 chip. The problem is that i can't get the voltage from any ANx pin . Am I doing something vrong i the code ?
...
OpenADC1(
ADC_MODULE_ON & ADC_IDLE_STOP & ADC_ADDMABM_ORDER &
ADC_AD12B_10BIT & ADC_FORMAT_SIGN_FRACT & ADC_CLK_AUTO &
ADC_AUTO_SAMPLING_OFF & ADC_MULTIPLE & ADC_SAMP_ON,

ADC_VREF_AVDD_AVSS & ADC_SCAN_OFF & ADC_SELECT_CHAN_0 &
ADC_DMA_ADD_INC_1 & ADC_ALT_BUF_OFF & ADC_ALT_INPUT_OFF ,

ADC_CONV_CLK_SYSTEM & ADC_SAMPLE_TIME_14 & ADC_CONV_CLK_14Tcy,

0,

ENABLE_AN3_ANA,
0,

0,
0
);
while(BusyADC1());
Isa = ADC1BUF0*0.00322;
CloseADC1();

...
I use Mplab with c30 , to view the result i use Mplab's RTDM feature . AN3 pin is input -TRISB1 is set- and i have 1.6 V on it, from opamp ...
 

Hi see this code this works fine on dsPIC33FJ64MC506A.
Code: 
#define AINPUTS 	0xE1C3 
#define TTSENS1	TRISBbits.TRISB2	// Temperature Sensor
#define TCH1BAT12 	TRISBbits.TRISB10 	// +12V Channel 1
#define TCH2BAT12 	TRISBbits.TRISB11 	// +12V Channel 2
#define TCH1BAT24 	TRISBbits.TRISB3	// +24V Channel 1
#define TCH2BAT24 	TRISBbits.TRISB4	// +24V Channel 2
#define TCH3BAT24 	TRISBbits.TRISB5	// +24V Channel 3
#define TCH1BAT48 	TRISBbits.TRISB12	// +48V Channel 1
#define TCH2BAT48 	TRISBbits.TRISB9	// +48V Channel 2
void InitADC(int amask) 
{
	InitADCPins();
	AD1PCFGL = amask;
	//ConfigPinsAsAnalog();
	AD1CON1 = 0;			// Clear it
	AD1CON1bits.AD12B = 1;	// 12-bit, 1-channel ADC operation
	AD1CON1bits.FORM  = 0;	// Integer (DOUT = 0000 dddd dddd dddd)
	AD1CON1bits.SSRC  = 0;	// SSRC bit = 111 implies internal counter ends sampling and starts converting.
	AD1CON2bits.CSCNA = 0;	// NO Scan required
	AD1CON2bits.VCFG  = 0; 	// AVss and AVdd are used as Vref+/- 
	AD1CON3 = 0x1F02; 		// max sample time = 31Tad, Tad = 2 x Tcy = 125ns >75ns
    IFS0bits.AD1IF = 0;		// Clear the A/D interrupt flag bit
    IEC0bits.AD1IE = 0;		// Do Not Enable A/D interrupt
    AD1CON1bits.ADON = 1;	// turn on the ADC
} //initADC
void InitADCPins(void)
{
// make pins input
	TTSENS1   = 1;	// Temperature Sensor
	TCH1BAT24 = 1;	// +24V Channel 1
	TCH2BAT24 = 1;	// +24V Channel 2
	TCH3BAT24 = 1;	// +24V Channel 3
	TCH1BAT48 = 1;	// +48V Channel 1
	TCH2BAT48 = 1;	// +48V Channel 2
	TCH1BAT12 = 1;  // +12V Channel 1
	TCH2BAT12 = 1;  // +12V Channel 2 
}
void ConfigPinsAsAnalog(void)
{
	AD1PCFGLbits.PCFG2 = 0;
	AD1PCFGLbits.PCFG3 = 0;
	AD1PCFGLbits.PCFG4 = 0;
	AD1PCFGLbits.PCFG5 = 0;
	AD1PCFGLbits.PCFG9 = 0;
	AD1PCFGLbits.PCFG10 = 0;
	AD1PCFGLbits.PCFG11 = 0;
	AD1PCFGLbits.PCFG12 = 0;	
}
int ReadADC(char Analogchannel)
{
	AD1CHS0bits.CH0SA = Analogchannel;	// Connect ANX to CH0 input 
	asm("nop");							// Some delay
	asm("nop");
	asm("nop");
    AD1CON1bits.SAMP = 1;       		// start sampling, automatic conversion will follow
    TDelayms(5);						// Some delay
    AD1CON1bits.SAMP = 0;       		// start sampling, automatic conversion will follow
    while (!AD1CON1bits.DONE);  		// wait to complete the conversion
    return ADC1BUF0;            		// read the conversion result
}
write the number of analog channel and get the value!
enjoy!
 

    V

    Points: 2
    Helpful Answer Positive Rating
thanks , i adapted the code to my application, it works fine ... i don't know why peripheral library functions for adc failed, i don't have time to debug that now

best regards
z
 
Last edited:

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top