+ Post New Thread
Results 1 to 3 of 3
  1. #1
    Junior Member level 3
    Points: 2,287, Level: 11

    Join Date
    Sep 2002
    Posts
    29
    Helped
    0 / 0
    Points
    2,287
    Level
    11

    Creating Split Planes PADS Help!!

    I am using PAD 9.3. and try following the tutor to do a split plan.
    After selected Board Outline and convert it to plan area. And then use auto Plan separate-Set Grid 25 mils.
    after draw around the plan area, PADS give me a message:
    All Corners must be within the plane are polygon..
    What can I do wrong?
    DV

    •   AltAdvertisement

        
       

  2. #2
    Full Member level 1
    Points: 2,260, Level: 11
    Achievements:
    7 years registered

    Join Date
    Feb 2007
    Location
    from the deepest roots of KAMOTE land
    Posts
    111
    Helped
    3 / 3
    Points
    2,260
    Level
    11

    Re: Creating Split Planes PADS Help!!

    try clicking on the other side to end the auto plane separate...



    •   AltAdvertisement

        
       

  3. #3
    Junior Member level 3
    Points: 2,287, Level: 11

    Join Date
    Sep 2002
    Posts
    29
    Helped
    0 / 0
    Points
    2,287
    Level
    11

    Re: Creating Split Planes PADS Help!!

    Hi, thanks for answer but I don't understand by clicking on the other side to end the auto plan separate.
    I upload the image see Is any one have any idea.

    HTML:
    <a href="http://images.elektroda.net/97_1331597072.jpg"><img src="http://images.elektroda.net/97_1331597072_thumb.jpg" alt="97_1331597072.jpg" /></a>
    URL:
    http://images.elektroda.net/97_1331597072.jpg



--[[ ]]--