Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

What is the problem on this circuit?

Status
Not open for further replies.

Mrkilic27

Junior Member level 3
Joined
Jul 6, 2011
Messages
25
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,446
I need to create a square wave from this circuit on Pspice but I couldn't come through.. What is the problem on this circuit? What should I do ?

Thanks for answers..

Circuit: https://i54.tinypic.com/2zyeiyq.png
 

No power supplies connected?
 

I do not know where will I connect the power supply? I am new in this circuits :(
 

Output of OpAmp connected to GND??? Are you sure you want this?
 

The oscillator will need a bipolar power supply (+/- 5 to +/- 15 V). Just place two VDC parts, preferably with correct polarity. And don't short the OP output.
 
Thanks for answers,

Dear FvM,

Can you show me on circuit please? =(

---------- Post added at 10:27 ---------- Previous post was at 10:07 ----------

I did something but I couldnt find a square wave ? How can I find it?

https://i51.tinypic.com/ae0j2d.png --> I found this.
 

I didn't want to claim clairvoyant skills, but it's said "preferably with correct polarity"

The pin designator V+ means, a positive voltage will expected....
 

I didn't understand What you mean? To obtain square wave ,what should I do ?
 

voltage source at the top should be reversed, (-) side sonnected to GND, (+) side to V+ of the opamp (pin4 in cct).
 
  • Like
Reactions: FvM

    FvM

    Points: 2
    Helpful Answer Positive Rating
just a junction dot at the intersection of the "crossed" wires
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top