Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] Cadence Calibre PEX Simulation Error

Status
Not open for further replies.
R

Radike

Member level 3
Joined
Aug 24, 2008
Messages
58
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,286
Activity points
1,722
Hi,
I am designing a CMOS IC for the first time. I need to use Calibre to do my DRC,LVS and PEX. I was able to run DRC and LVS. However, I am getting an error message when I run Calibre PEX. The error message is:

ERROR: Unable to open pdb: "svdb/CHECK_POST4.pdb"

CHECK_POST4 is my design file name. Can somebody help to solve this problem?

Thanks a lot!!!!
 

I suspect your path name "svdb/CHECK_POST4.pdb" is not correct. Calibre needs either a relative path name related to your start directory, or an absolute path name (beginning with a "/").
 

you must link to the svdb folder in your LVS run directory and not only to the run directory itself!
 
  • Like
Reactions: Radike

    R

    Radike

    Points: 2
    Helpful Answer Positive Rating
the triggler "RC_DECK" or some sort of #DEFINE u should eable
 
  • Like
Reactions: Radike

    R

    Radike

    Points: 2
    Helpful Answer Positive Rating
Hey,

Thanks for the information! I ll try and see
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top