Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

pull-down and pull-up devices

Status
Not open for further replies.
K

kickbeer

Full Member level 3
Joined
Nov 7, 2008
Messages
162
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,296
Activity points
2,356
pullup devices

Hi,

What is the function of pull-up device and pull-down device respectively? In MOS technology, NMOS is always used as pull-down device and PMOS is always used as pull-up device? Am i correct?
 

why pmos is used as pull up

A pull-up device when energized will pull the ouput to supply(i.e "1") and a pull-down will pull the output to ground (i.e. "0").
Usually PMOS is used for pull-up since it can provide GOOD "1" (HIGH) i.e VDD and
NMOS is pull-down since it can provide a GOOD "0" i.e. (LOW ).
 

    K

    kickbeer

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top