Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

What kind of circuit design is it?

Status
Not open for further replies.
Re: Circuit design

you check out this link... its about this cloc multiplier...
 

    ryusgnal

    ryusgnal

    Points: 2
    Helpful Answer Positive Rating
Re: Circuit design

This is a simple clock divider. In a D FF connect Q-bar to D input.
 

Re: Circuit design

its a clock multiplier...consult fsm design concepts....

Added after 5 minutes:

i think this circuit can be design using asynchronous fsm design techniques...
 

Circuit design

u should avoid using the clock generated from other signal in synchronous design
 

Circuit design

try exor gate where one input is clock and another is feedback from output with some delay. use buffer or even number inverters.

Added after 49 seconds:

for delay, use buffers or even number of inverters
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top