Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Looking for documents about ASIC Flow

Status
Not open for further replies.

truebs

Full Member level 5
Joined
Jan 21, 2005
Messages
310
Helped
22
Reputation
44
Reaction score
4
Trophy points
1,298
Location
Asia
Activity points
2,980
ASIC Flow ?

Hi ,

Can some one point me to or give me , a document on ASIC flow,
I need real ASIC flow , as followed in industry !

Right from Specification to POST Si Validations !!!
and if the tools used at each step are explained...it'll be BEST !!

Thanks,
 

Re: ASIC Flow ?

this is the flow till fab...
 

    truebs

    Points: 2
    Helpful Answer Positive Rating
ASIC Flow ?

ceck out synopsys manuals they are the best

Added after 1 minutes:

the above one is from a standard text book i don't remember the name. is it from bhaskar
 

ASIC Flow ?

Hi,
Application Specific integrated circuits By smith is very good for beginners.
 

ASIC Flow ?

The flow which is depicted here in brahma's post is most common in the educational learning. But in industry, the flow goes more complex.

The main difference between this flow and the real industry flow is that there will be many branches and loops and repeatation, not like "finish one step and proceed to next step".

Lot of flow components like logic equivalence (netlist-to-netlist) check; Clock tree synthesis (CTS) and most importantly Static timing analysis (STA) (and some more steps like cross talk and others) are not mentioned in the flow mentioned here. But anyhow, that is the educational flow which people start with learning
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top