Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

virtuoso -problem while plotting current density with vgs sweep

Status
Not open for further replies.
P

prabhjot_devgun

Newbie level 4
Joined
Dec 25, 2013
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
47
Hi everyone,

I am trying to plot current density (Id/Weff) v/s Vgs i.e Vgs sweep, but unable to plot and get following error in CIW (IC616 virtuoso):-
expression evaluation failed: val is not legal.
expression evaluation failed: OPT("/M0","ids")/OPT("/M0","weff")
"("quotient" 0 t nil ("*Error* quotient: can't handle (srrWave:0x23af1020 / nil)"))"
Click to expand...

I tried to make expression in calculator using opt option and used ids/Weff. I have added the screenshot. Please help me to solve this problem.

Regards.
 
Last edited by a moderator:

Can't find a screenshot.

Seems weff can't be found. Are you sure that weff is a parameter which can be found in the parameter set of transistor M0 ? If not, you'd have to declare it explicitly as a parameter.
 
What if you substitute the -value- of Weff that you know
to be true, or that you can pick out of model / OP result
by a preceding calculator expression?
 
Thank you all of you for quick reply. sorry i forgot to attach screen shot. Actually i am working on gm/id method.

Screenshot from 2015-11-18 04^%11^%55.png

please point out where am i making mistake.

Regards.

- - - Updated - - -

Thank you for quick response. i need to plot id/(Weff) v/s gm/id OR id/(Weff/Leff) vs Vgs for this i used parametric sweep of Vgs. and tried to plot current density using calculator as shown in pic. please guide me how to plot it.

Screenshot from 2015-11-18 04^%11^%55.png

Regards.
 

@Dominik Przyborowski, thank you for your response. you are right , i made mistake. So please tell me how to do this plot. i use 6.16 version of virtuoso. I am totally confused.
 

In such cases, I usually use result browser tool. From it you can easily export parameters, for example I've tried to calculate your expression for transistor N3:

Code: 
pv("N3" "ids" ?result "dcOpInfo")/pv("N3" "w" ?result "instance")

But I'm not sure that "w" parameter returns Weff (anyway it's not width from parameters of transistor, in my case w = 2.4u, "w" parameter returns 2.16u).
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top