Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] Is 1/2 Vss = floating

Status
Not open for further replies.
S

sharethl

Newbie level 5
Joined
Dec 27, 2010
Messages
8
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,328
Hi,

An ADC datasheet said: if Pin4 is floating => DDR mode, if not floating => SDR mode,
The schematic I saw connected this pin to voltage divider to get 1/2 Voltage supply,
Is this ADC configured as DDR or SDR?
floating means pin is not connected, but what 1/2 Vss

Thanks.
 

Which ADC? Can you give a link to the datasheet?
 

Just read the text completely: "When this pin is floating or connected to 1/2 the supply voltage"...
 
Page 4 also describes how pin 4 works:
When this pin is floating or connected to 1/2 the supply voltage, DDR clocking is enabled.
Click to expand...

edit: Oops, crosspost with FvM
 
FvM said:
Just read the text completely: "When this pin is floating or connected to 1/2 the supply voltage"...
Click to expand...

Oh, Thanks. I did read that one, but for page 31, it didn't say that, then I forgot.


Have a great holiday!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top