Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Mentor Expedition PCB

Status
Not open for further replies.
P

purva123

Newbie level 3
Joined
Aug 22, 2013
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
19
I am looking forward to use Expedition PCB. I have some queries:
1. How to assign clearances in net class?
2. How to assign nets to net classes?
3. How to specify net class trace width in expedition?
4. whenever we transfer design from schematics to expedition PCB , only one sheet i.e. working sheet gets transferred. So how to transfer whole design in one attempt?
5. How to swap pins and gates manually?
Reply soon as soon possible.:shock::shock:
 

1.How to assign clearances in net class?
2. How to assign nets to net classes?
3. How to specify net class trace width in expedition?
 
sivamani said:
1.How to assign clearances in net class?
2. How to assign nets to net classes?
3. How to specify net class trace width in expedition?
Click to expand...



Can you please give the steps?
 

I have used 8 years back and now i don't have clear step by step procedure..please use cis help..
 

You can find all the necessary information in the Constraint Editor System 9CES) user manual. If you have a valid Mentor installation you can find the manual at "C:\MentorGraphics\7.9.4EE\7.9.4EE\docs\pdfdocs\ces_user.pdf".
You can also login at supportnet and find the manual there.

If you don't have a supportnet login, you can register at https://www.mentor.com/support. You need a site id to register.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top