Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
about j3,Peripheral Expansion Connector
sir,
i want to enable and disable the ports of J3, Peripheral Expansion Connector of dsk 6713 processor.. i have written
#define mcbsp_dxr0 0x00000000u;
but if i check the voltage of the port, it still consists of some voltage..and if i include...
sir,
i want to enable and disable the ports of J3, Peripheral Expansion Connector of dsk 6713 processor.. i have written
#define mcbsp_dxr0 0x00000000u;
but if i check the voltage of the port, it still consists of some voltage..and if i include the statement #include<mcbsp.h> im getting...
the output pins can be DC_CNTL0, DC_CNTL1, DC_DX0(McBSP0 transmit data).... how can i write code in 'c' to enable / disable these pins...please help me out soon....
sir, i want to enable/disable the external peripheral interface ,j3 output ports of 6713 processor by using 'c' code...can you please say me what statement i need to write to enable/disable the external peripheral interface ports...
Thank you sir.
Re: Module for calculation SAD motion estimation using 2D-Tr
sir, Here iam attaching the base configuration block of motion core architecture of my project... Iam trying to write the vhdl codes for it...
But iam not getting the exact fuctionality of the architecture to write vhdl code...
Here iam attaching the base configuration block of motion core architecture...
Iam trying to write the vhdl codes for it...
But iam not getting the exact fuctionality of the architecture to write vhdl code..
So can you please help me by explaining the blocks..
kindly do the need...
Thanks...
hi sir,i'm NALINI ,doing Mtech in power electronics and drives ........
sir i have taken Improvement of the Electric Power Quality Using Series Active and Shunt Passive Filters" as a base paper for my project....i got struck in designing of LPF filter in closed loop control scheme of dual...
Sir,i need some information on connection of truck to dsp kit... what i mean to say is now i need to connect a wired robot/truck to the dsp kit and make it move in different directions according to the dsp led's like, for one led glow on the dsp kit the truck should move in one direction...To...
relay:
Sir, im very much confused with my project.. i need some information on ports of dskc6713.. what i mean to say is now i need to connect a wired robot/truck and make it move in different directions according to the dsp led's glow like, for one led it should move in one direction...so can...
Hi sir, im also looking for connection of uln2003 with relay GS-SH-205T?u have said fix one end and change the other end one by one but fixing in the sense can we keep probe on any terminal?but there will be 8 terminals right? i didnt get clear idea what ur saying... can you provide any schematic?
ok thank you sir.. Ill go with it.
---------- Post added at 06:49 ---------- Previous post was at 06:38 ----------
Actually i asked my guide why to use relays . he replied me that by using relays, the dsp kit wont get damaged and also he said something like if we use relays power supply comes...
thank you for your reply sir...But, instead of using transistors can i use any relay ,because our project guide is very particular about using the relay and the IC ...So can you suggest me which relay and ic can i use for my project..actually i need 4 relays for truck to move..so can i go with...
sir, Im swetha doing m.tech.My project is hand gesture recognition. In this i wll give 4 gestures as input to the dsp and according to it one of the led's of dsp tmsc6713 processor will glow. upto this i have done. Now i need to connect one truck to the dsp processor and make it move in...
sir/ madam I joined in m.tech in embedded systems branch this year. I'm very much confused with projects like what to do and how to choose them. please clarify my doubt on projects. Thank You.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.