Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

about J3, Peripheral Expansion Connector

Status
Not open for further replies.
S

swetha reddy

Junior Member level 1
Joined
Jun 26, 2010
Messages
15
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,387
sir,
i want to enable and disable the ports of J3, Peripheral Expansion Connector of dsk 6713 processor.. i have written

#define mcbsp_dxr0 0x00000000u;

but if i check the voltage of the port, it still consists of some voltage..and if i include the statement #include<mcbsp.h> im getting an error like cannot open the file mcbsp.h.
can you say the solution for this. Thank You.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top