Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Solar charger LT3653

Status
Not open for further replies.

kolines

Newbie level 3
Joined
Oct 26, 2012
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,318
Solar charger LT3652 (Linear Technology)

Hello,
If anyone has experience with Integrated Linear Technology LT3652 from Linear Technology.
I've done a battery charger LT3652..
I wonder if it is normal so hot I checked with an infrared thermometer and reaches about 54℃. I wonder if it is normal. Although the data sheet provides as follows:
Operating junction: -40℃ to 125℃
Storage temperature range: -65℃ to 150℃

THX.
 
Last edited:

As θJC = 3°C/W, the actual junction temperature will be 3 degrees per watt greater then the case and must be below 125 degrees. So providing it is dissipating less then (125-54)/3 ~ 23 watts you should be safe.
Frank
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top