Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Regarding the CPLD Devices

Status
Not open for further replies.

prakashvenugopal

Advanced Member level 1
Joined
Jun 1, 2011
Messages
473
Helped
15
Reputation
30
Reaction score
15
Trophy points
1,298
Activity points
4,973
HI,

I am quite new to CPLD Devices. Can anyone let me know the Fast moving CPLD Devices in
Xilinx.?

Thanks in Advance.


Regards,
V. prakash
 

You have to decide on CPLD based on u r application. check for the gate count and then decide on what CPLD to be used. All CPLD from Xilinx is good but it depends on u r application.
 

If you mean by fast moving a low pin-to-pin delay (like 2 ... 5ns) then you will end up to a macrocell (super PAL) based architecture. These devices have a very predictable delay in the order of magnitude of 2 ... 10ns (the fastest device is an LC4032C-25xxc, but not Xilinx) fastest device of Xilinx will be a Coolrunner alike.
Regards
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top