ALMIGHTY TECH
Member level 3
hello ..
these are the detail of my project..
i am using nokia 1280 mobile phone ---> Nokia Europe - Technical specifications - Nokia 1280 support
---> Nokia 1280 pinout - CPKB - Cell Phone Knowledge Base
i have connect nokia 1280 mobile to computer's serial port through max232(make own fbus data cable).
i am using "advance serial port monitor" to send hex code to mobile.------> Serial Port Monitor - advanced serial port monitor and RS232 port spy sniffer
it can be also used to spy the comm port.baud rate := 115200, data bit:=8 , parity:=none , stop bit:=1
now see bellow link..
as in above link...
i send command to mobile from computer to get hardware and software version of mobile phone.--->
1E 00 0C D1 00 07 00 01 00 03 00 01 60 00 72 D5
i received hardware and software version of mobile (from mobile to computer)---->
1E 10 00 7F 00 02 D1 00 CF 6D
1E 10 00 D2 00 28 01 00 00 03 56 20 30 36 2E 32 30 0A 30 31 2D 31 32 2D 31 30 0A 52 4D 2D 36 34 37 0A 28 63 29 20 4E 6F 6B 69 61 00 01 44 7B 9A
--> V 0 6 2 0 0 1 - 1 2 - 1 0 R M - 6 4 7 ( C ) N o k i a
so it means.. communication works fine between mobile <---> computer
i can also get imei number..
now i need to make call from nokia 1280 mobile phone through fbus..
so please tell me that how to get those codes....
and i have also try gnokii 0.6.31 on windows..
i can get mobile phone detail like IMEI,model,version from gnokii --identify..
but when ,i send command to make voice call( gnokii --dialvoice 9033544852).
but its not working..
it says like-->"The fbus stream is out of sync - expected 0x0c, got 0x10"
--> **broken link removed**
sending sms is also not working... ..
please help me ..
.
some link i have read..
http://cvs.savannah.gnu.org/viewvc/.../protocol/nk3110.txt?revision=1.2&root=gnokii
Hacking Nokia FBUS – calling speed dial numbers « Embedded Technologies
[moved] 1208 FBUS Dial and answer command - Nokia Developer Community - Discussions
these are the detail of my project..
i am using nokia 1280 mobile phone ---> Nokia Europe - Technical specifications - Nokia 1280 support
---> Nokia 1280 pinout - CPKB - Cell Phone Knowledge Base
i have connect nokia 1280 mobile to computer's serial port through max232(make own fbus data cable).
i am using "advance serial port monitor" to send hex code to mobile.------> Serial Port Monitor - advanced serial port monitor and RS232 port spy sniffer
it can be also used to spy the comm port.baud rate := 115200, data bit:=8 , parity:=none , stop bit:=1
now see bellow link..
as in above link...
i send command to mobile from computer to get hardware and software version of mobile phone.--->
1E 00 0C D1 00 07 00 01 00 03 00 01 60 00 72 D5
i received hardware and software version of mobile (from mobile to computer)---->
1E 10 00 7F 00 02 D1 00 CF 6D
1E 10 00 D2 00 28 01 00 00 03 56 20 30 36 2E 32 30 0A 30 31 2D 31 32 2D 31 30 0A 52 4D 2D 36 34 37 0A 28 63 29 20 4E 6F 6B 69 61 00 01 44 7B 9A
--> V 0 6 2 0 0 1 - 1 2 - 1 0 R M - 6 4 7 ( C ) N o k i a
so it means.. communication works fine between mobile <---> computer
i can also get imei number..
now i need to make call from nokia 1280 mobile phone through fbus..
so please tell me that how to get those codes....
and i have also try gnokii 0.6.31 on windows..
i can get mobile phone detail like IMEI,model,version from gnokii --identify..
but when ,i send command to make voice call( gnokii --dialvoice 9033544852).
but its not working..
it says like-->"The fbus stream is out of sync - expected 0x0c, got 0x10"
--> **broken link removed**
sending sms is also not working... ..
please help me ..
.
some link i have read..
http://cvs.savannah.gnu.org/viewvc/.../protocol/nk3110.txt?revision=1.2&root=gnokii
Hacking Nokia FBUS – calling speed dial numbers « Embedded Technologies
[moved] 1208 FBUS Dial and answer command - Nokia Developer Community - Discussions