Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Need help in protel DXP- loading the Netlist file

Status
Not open for further replies.
H

ha

Junior Member level 1
Joined
Feb 19, 2004
Messages
19
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
IRAQ
Activity points
153
Need help in protel DXP

Hi
I was working with protel 99SE and it is easy to load the Netlist file in the PCB document directly , but now with protel DXP I did not find the way to load
the Netlist file directly in PCB Editor, could any body explain the way step by step.
Thanks.

 

Re: Need help in protel DXP

Protel DXP have several Help´s manual.
In one of them you will find step by step what have to do

Regards,
Albert
 

Re: Need help in protel DXP

Here's an article from the old Protel Knowledge Base that tells you how to do it. The information is no longer available on the Internet since Altium switched over to a Wiki.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top