Alessa Bernales
Newbie level 6
hi! good day!
I am planning to do a 2 - 12 Volts battery charger with some specific task:
1. the Micro controller be able to know the actual percent rate of the 2 battery
2. if the battery 1 reaches less than 50% the device will recharge the battery
3. if the battery 1 reaches 80%, the device will disconnect the charging process in battery 1 and charge the battery 2 if its less than 80%.
4. if the battery 2 reaches 80%, the device will disconnect the charging of the two battery and do nothing until one of the two battery will reach less than 50% again.
PIC - PIC16F877A
disconnecting means - Relay
2 - 12 Volts Battery
i hope someone could help me in my project, my professor use Proteus for simulating he device then for the program he required us to use Mikro C. please i need help to those who know this one
I am planning to do a 2 - 12 Volts battery charger with some specific task:
1. the Micro controller be able to know the actual percent rate of the 2 battery
2. if the battery 1 reaches less than 50% the device will recharge the battery
3. if the battery 1 reaches 80%, the device will disconnect the charging process in battery 1 and charge the battery 2 if its less than 80%.
4. if the battery 2 reaches 80%, the device will disconnect the charging of the two battery and do nothing until one of the two battery will reach less than 50% again.
PIC - PIC16F877A
disconnecting means - Relay
2 - 12 Volts Battery
i hope someone could help me in my project, my professor use Proteus for simulating he device then for the program he required us to use Mikro C. please i need help to those who know this one