Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Interference measurement GPSL5 - what is actual signal level

Status
Not open for further replies.
G

geravineet

Newbie level 1
Joined
Jun 6, 2009
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,287
interference measurement

I am trying to measure interference on GPS L5 (1176.42 Mhz). With RBW 300 KHZ and VBW 30 Khz I got interfering signal level -60 dbm whereas with RBW 300 Khz and VBW 3 KHZ, I get interfering signal level at - 40 dbm. can anyone explain what is actual signal level.
 

interference measurement

Recommended settings for VBW is 1/10 of RBW.
RBW is the right paramter to judge the signal level than VBW.

Added after 58 seconds:

You may read the post
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top