xiejinghua
Newbie level 1
Now I am using a fpga ( ep1c4 ),and have already install pci_compiler-v3.2.0,I intend to get the PCI local signals directly from the ipcore,but when I put my PCI
card onto the main board,the system cann't recognize my device (the system can boot and work healthily )
Now what I want to do is to make the system recognize my PCI card,so I just assign the pins of PCI and add a ipcore of pci_mt32,but I didn't do anything about PCI local signals,and then I put the ".pof" file into epcs1 by using AS model
Now I beg you to give me some hints ,please tell me how I can solve this problem,thanks very much
card onto the main board,the system cann't recognize my device (the system can boot and work healthily )
Now what I want to do is to make the system recognize my PCI card,so I just assign the pins of PCI and add a ipcore of pci_mt32,but I didn't do anything about PCI local signals,and then I put the ".pof" file into epcs1 by using AS model
Now I beg you to give me some hints ,please tell me how I can solve this problem,thanks very much