how to draw different angles in p-cad layout

[Vamsi115]

Hi All,

I want to draw a line with an angle of 70Degrees in P-CAD layout.
I am able to draw lines with 90 and 45 degrees only. So PLZ Help!!

Thanks,
Vamsi.

 

[B.G.]

Hi,

Press the "O" key to switch the orthogonal modes while placing lines.
The right side of the Status Line displays current orthogonal mode information.
The "Ortho=Amy" must be displayed.

 

[sapphire_2010]

hi,
to draw any line to any angle you have to set rotation angle first. Go to Option-->Configure->rotation angle and set it to 70 degree.
now select line and press Shift+R. you will get desire result.
Hope it works.

regards
SA

 

[Vamsi115]

sapphire,

Thanks a lot for the help. It really helped me save a lot of time.

Thanks Again.

Vansi.