Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to change code from 89c51 to 89s51?

Status
Not open for further replies.
O

omidgold

Member level 2
Joined
Jun 5, 2006
Messages
48
Helped
4
Reputation
8
Reaction score
1
Trophy points
1,288
Activity points
1,521
hello all
i have a code for 89c51 but i want switch from 89c51 to 89s51 is possible used this code for that without any change on the code
?
thanks very much
 

Re: about 89s51

As far as code contains and code execution are concerned 89C51 and 89S51 are the same microcontrollers .. the difference between them is in the way code memory can be programmed ..

For more details use SEARCH ..


Regards,
IanP
 

Re: about 89s51

omidgold said:
hello all
i have a code for 89c51 but i want switch from 89c51 to 89s51 is possible used this code for that without any change on the code
?
thanks very much
Click to expand...
in your case there is no change just programe the same code written for 8051 on 89s51 it will work.
 

Re: about 89s51

from atmel : 89c51 is obsolet, it don't production again, and replaced it with 89s51.
 

Re: about 89s51

c51 series is almost discontinued and is not recomended for new designes
and even you can replace it with s51 series easily.
 

Re: about 89s51

ALL FAMILY OF 8051 HAS THE SAME CODE BUT THE BURNER MAY BE DIFFERENT
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top