snir_r
Newbie level 1
Hi All,
I'm going to design an high speed HDI pcb - 18L 80mil thickness.
I'm going to run 25G-KR, 10G-KR, PCIe Gen 4.0 (16MT/s).
My trace length will be around 5-6 Inch to the backplane.
The PCB material will be Isola I-Tera MT40 or Panasonic Megtron6.
I'm not sure which PCB material will be the better for this design, the spec pretty the same.
Please advice.
Regards,
Snir
I'm going to design an high speed HDI pcb - 18L 80mil thickness.
I'm going to run 25G-KR, 10G-KR, PCIe Gen 4.0 (16MT/s).
My trace length will be around 5-6 Inch to the backplane.
The PCB material will be Isola I-Tera MT40 or Panasonic Megtron6.
I'm not sure which PCB material will be the better for this design, the spec pretty the same.
Please advice.
Regards,
Snir