Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

EPIC programer need shematic +soft

Status
Not open for further replies.
programmer 3dip8

New Epic progbeta

/ Warning #3 - Don't upload files from the net just post link instead!
Read forum rules before posting!
Link for download: **broken link removed**
 

3dip8 schematics

hi friend

did some one got there new serial pic programmer can some one share it here


regards
 

схема 3dip8

flinter said:
The epic works just fine. Thanks for the .pdf.
You do need to change R2 into a bigger value (e.g. 10K),
or you won't get to the 13V programming voltage.


Greetz,
Flinter

Ok, I have a two questions regarding this comment, since I have build it and does not work, still have the 0000 error, and I have made the cable myself and it is not more of 80 CM of length, so:

1. Shall I really change the R2 resistor for a greater value?

2. On the cable the GND shall be connected together (GND from DB25 connected to DB9), and what kind of db9 should I use, male or female?

Thanks....
 

winpic800 3dip8

1-it works as in the schematic,without changes
2-i soldered the cables directly from the db25 to the board,and ground must be connected
 

epic plus programmer for winxp

Hi again, I have made the corrections based on your information but still does not work, so I may ask you, how did you achieved the correct configuration of the hardware, could you tell me some of the measures I should do to calibrate the rheostat, etc.?
Thanks
 

epic plus programmer verifying error on winxp

I have found a schematic of epic on microchip's forum,it's 3dip8.
Have anybody built it?
 

epic win programmer schematic

I have seen it and i will try to build it this 3dip8 looks pretty interesting and reasonable to build since does not use any resistor...
 

epic программатор схема

Hello

I need EPICWIN new version which is dedicated to work on windows xp, I don't want beta versions.

Regards
 

epic adapter schematic

Another EPIC question:
i'm succesfully using this programmer with the beta software download,as the programmer for MICROCODE...the only strange behaviour i find is that when code protect is selected,the first bytes up to 0100h can be read,after that,the usual verify error appears...am i doing something wrong?
Thanks from Uruguay!
 

picbit .zip .rar

E246Beta
 

schematic 3dip8

meProgForEPICsetup320
 

picbit.exe download

Hello,
All these are LPT port programmer what about serial programmer?

Regards.
 

epic programmer tie to ground

Hello

Any one has the latest stable version of epic, or melabs programmer.

Thanx tellhun, good job, but can you upload stable version.


This software already can be downloaded from:

**broken link removed**

We need stable version guys, any one of help.

Thanx :D
 

epic programmer pcb

Hello,
I want to build one EPIC programmer. Sine it requires different ZIF adapter for PICs. There is one ZIF which accepts 8 to 40 pin PIC as shown in this link. In that photo there is some jumper setting. So any one have any details of this particular adapter or its schematic. I am using 3.13 vesion of software.

**broken link removed**

Bye
 

download epic programer

Hi, All

I have aquestion about the software of EPIC :

Today, I downlaod Version 3.30 beta from this link : **broken link removed**

is this software a full version, I mean if I have a hex file which its size is 8K Byte and I want to put this hex file in 16F877 is this software put the whole hex file in 16F877?

Please let me know, because I want to build this programmer.

Kind Regards

Hassan
 

EPIC is good programmer. I build it . (with ZIF pcb). and you can use it with winpic800 software. this application has auto detect pic feature, cmd line parameters.. etc. works with Win XP no problem and winpic800 is freeware.

Of course you can add another programmer.
https://siscobf.webcindario.com/winpic800.htm

I added Epic programmer. Hw settings included. archive
 

DOWNLOAD SCHEMATICS OF
LOOK FOR GOOGLE
picbit

plc FOR A PIC 16C84 PAGE
AND
DOWNLOAD DAVID TAIT PARALEL PROGRAMMER

IS A GERMAN PAGE

GOOD LOOK
 

hi everyone

Added after 12 minutes:

hi all
check the following site you will find a very good programmer .

www.5v.ru/psp.htm
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top