Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Designing 15v,DC to 230vAC inverter

Status
Not open for further replies.

pras_02

Newbie level 1
Joined
Sep 4, 2009
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
chennai
Activity points
1,288
hai to all,

I'm trying to do a project using solar energy,i.e to collect the max. output fom the pv cells,boost it with a DC-DC converter and an inverter to get a feasible 230v,50hz output.. plz do help me out with designing the converter and the inverter..

thank u.
 

You cannot design the circuits without knowing how much max output current and which waveform you want.
10mA, 100mA or 1A max output current?
Square wave, modified square wave or sine wave output?

Please do not e-mail me again.
 

hi there,
How do u design an inverter without knowing the power rating of the inverter?
 

If you don't know the power rating of an inverter you want to make then you don't need an inverter.

The design is based on its amount of max power.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top