yefj
Advanced Member level 4
Hello, I am starting to design a new design for a driver.So i opened a new thread with your permission in order not to mix the old with the new.
Specifications:
BW of 2MHz will be good.
10mW input needs to be interpret into 30mA on a load coil.
The FM coil data:
sesitivity: 450 KHz/mA
3dB bandwidth 2.2MHz
resistance 2Ohm
inductance 1.5uH
previously you recommended me to use a combination of AD8033 and a MOSFET
could you please recommend me some good configuration of two of those element .
The main thing i need it to be stable.no oscillations at high frequencies as much as possible.
Thanks.
Specifications:
BW of 2MHz will be good.
10mW input needs to be interpret into 30mA on a load coil.
The FM coil data:
sesitivity: 450 KHz/mA
3dB bandwidth 2.2MHz
resistance 2Ohm
inductance 1.5uH
previously you recommended me to use a combination of AD8033 and a MOSFET
could you please recommend me some good configuration of two of those element .
The main thing i need it to be stable.no oscillations at high frequencies as much as possible.
Thanks.