Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Circular & Directional Microstrip Antenna Design ?

Status
Not open for further replies.

rizadisasmitadarwis

Newbie level 5
Joined
Jul 11, 2011
Messages
8
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,321
Help for this design,,, i need to design microstrip antenna with specification dual-band frequency 145MHz and 435MHz, circular polarization and directional with gain 16 dB,,, thanks
 

have you tried googling about it. I saw was also searching for something like this, which i found in the google search.
 

yes,,, I haven't to find this problem in google,, no many information about it,, can you help me please!
 

ok...can you forward me your mailing address...
I think I still have the downloaded file in my drive.
 

oke thank you very much,,, I have been send my email adress with private message,,,
 

You can do with with two feeds, delay one feed by 90° using a hybrid coupler.
If you can get you hands on this book, it will help. "Microstrip and Printed Antenna Design", by Bancroft
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top