Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

AVR programmer using LPT cord

Status
Not open for further replies.
A

akash_deo

Newbie level 1
Joined
Jul 3, 2008
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,290
:cry: my programmer kanda STK200+/300 is not working. it is showing communication error for each trial , instead of having all the connections correct.[/i][/b]
 

Re: AVR programmer

When I was worked with AVR, I didn't use any programmators. I had make it from LPT cord and plug to AVR without anything chips (MAX232)
 

Re: AVR programmer

alexandr22061986,

AVR noobie here, which program do you use for the schematics you gave.
 

Re: AVR programmer

akash_deo said:
:cry: my programmer kanda STK200+/300 is not working. it is showing communication error for each trial , instead of having all the connections correct.[/i][/b]
Click to expand...

can you post a schematic of the programmer you are using?
what program are you using?
 

Re: AVR programmer

alexandr22061986 said:
When I was worked with AVR, I didn't use any programmators. I had make it from LPT cord and plug to AVR without anything chips (MAX232)
Click to expand...
What driver do you use for this (COM) programmator?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top