A new man who want to study RF design

[fanrourou]

study rf

Hi , everyone
I want to start to study RF IC design .
Would anyone be kind enough to give any suggestion ?

 

[vfone]

study rf?

Suggestion to start or not, or from where to start?

 

[balaguru thavamani]

Suggestion to start or not, or from where to start?

Hi,

I know some basics of antenna but i'm interested to learn Rf circuit and system design from where can i start this?

 

[fxxjssc]

Hi ,
A good PCB level training is a must. I think so!

 

[alan6449]

need good fundamental on RT ..basically in theoritical

 

[balaguru thavamani]

need good fundamental on RT ..basically in theoritical

hi alan,
RT in the sense?

 

[salma ali bakr]

Hi , everyone
I want to start to study RF IC design .
Would anyone be kind enough to give any suggestion ?

I recommend that you PM the user here called Khouly...he's excellent
and he'll help you right away

 

[khouly]

RFIC is very interesting topic , but it need alot of work and study

u need to be good in analog design , and know well analog concepts

u need to have good RF concepts back ground like

i recomed that u spend sometime reading

RF microelectronics of behzad rezavi

CMOS Radio Frequency integrated circuits : tom lee

Radio frequqncy intergated circuit : Calvin pelet

u also should check the web for RFIC lecturs and apers

check those
http://bwrc.eecs.berkeley.edu/
**broken link removed**
**broken link removed**
**broken link removed**
www.circuitsage.com
**broken link removed**

wish this give u a good kick start

alos u need to know about RF simulators like MWO ADS and sure cadence spectreRF

khouly

 

[liaowuliao]

I'm studying RFIC,and before I was engaged in RF board system design. I find analog knowledge is very important to IC design

 

[Yakeen]

Analog IC Razavi books is very important in order to improve your knowledge

 

[khouly]

sure in IC analog base is very importnat , coz in side the chip u apply most of the analog concepts , but when u go out side u need the RF

and if ur freq becoming very high , u will need the RF and MW concepts inside the chip

khouly