Embedded_Geek
Full Member level 6
How to detect a high to low pulse at any port pin of 8051. I mean how to check the condition whether a particular port pin is receiving a high to low pulse or not.
i.e., edge triggering not level triggering.
Like i want 8051 uC to blink led if it receives a high to low pulse at port pin 3.1 using embedded C.
thanks in advance[/b]
i.e., edge triggering not level triggering.
Like i want 8051 uC to blink led if it receives a high to low pulse at port pin 3.1 using embedded C.
thanks in advance[/b]