Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

16 x 1 or 16 x 2 LCD code

Status
Not open for further replies.
A

anybisi

Newbie level 6
Joined
Aug 16, 2009
Messages
12
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Location
UK
Activity points
1,330
Hi,
Please has any one the code or program that can be used in a standard 16 x 1 or 16 x 2 display, only displaying V_Bat, Curr, V_out and volt and also
a logo
many thanks
 

anybisi said:
Hi,
Please has any one the code or program that can be used in a standard 16 x 1 or 16 x 2 display, only displaying V_Bat, Curr, V_out and volt and also
a logo
many thanks
Click to expand...

Hi.

You don't even mention MCU, compiler, hardware, nothing.
You also say that you would like to display a logo? Do you think this could be done on a 16x2 LCD for instance? I'm not saying it's impossible, but logo's quality would be almost unacceptable plus you have to create characters of your own. You say you don't even have a sample code to drive the lcd, do you think that the logo is your primary concern at the moment?
 
Last edited:

hi,
thanks for replying, PIC16f688, ASM, 16 x 2 display.
I could do with out the logo I'll just display a name(7 or eight xtars)
thanks
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top